The C3 Series chassisis a medium performance
design in a low cost 4U rackmount enclosure.
Feature rich, the C3 Series is a solid,
robust design which will meet the most
rigorous and demanding requirements.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
There is more than
ample drive storage with the provided three
front accessible 5-1/4 inch drive bays,
and one front accessible 3-1/2 inch drive
bay.
A lockable door
with a plexiglas insert covers and protects
the drives. Accessible behind the door
is the power and reset switches as well
as the power-on and drive activity LED's.
The LED's are visible through the door
when it is closed.
Cooling is provided
by two hot swap 3.6" 51CFM fans.
An air filter is mounted behind the
front panel. The air filter can be easily
removed by opening the drive door and
pulling the filter housing out.
The C3 Chassis
provides for mounting an ATX motherboard.
An innovative card hold-down mechanism
assures cards stay seated in high-G
environments such as shipping.
19" (wide)
x 4U (6.95") (high) x 17.8" (deep)
Weight - 18KG / 37.5LBs
Drive Capacity
Three horizontal 5-1/4 inch half height
drives - front accessible
One horizontal 3-1/2 inch x 1 inch drive
- front accessible
The drive cage is suspended on anti-vibration
mounts.
Front Panel Controls
Power
switch - black momentary with 2 position .100
header for board connection
Reset switch - red momentary with 2 position
.100 header for board connection
Power LED - green with 3 position .100 header
for board connection
Drive Activity - Amber with 2 position .100
header for board connection
Switch
and LED connectors are labeled at the connector
end.
Rear Panel Details
C3 - 7
Plug-in card slots
Knockouts for 2 DB9, 1 DB15, 1 DB25 and 1
SCSI connectors
Cooling
Two hot
swap 3.6 inch 51CFM ball bearing fans
Positive chassis pressure
30PPI filter installed
Fan Options: thermister regulated fan speed,
3-wire tach signal
Chassis Plans is more than a chassis
supplier. Our primary business is providing long life span fully integrated turnkey systems tailored exactly to customer specification. We are experts at multi-vendor integration and offer a complete product
line including the latest long-life motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
