Home > S6736 Backplane

	FEATURES   Butterfly form factor supports PCI-Express™ option cards   Supports 2U Chassis designs   One SHB Express™ (PICMG® 1.3) System Host Board Slot   One x16 PCI Express Slot (mechanical)   Three x8 PCI Express Slots (mechanical)   Audio port for speaker and microphone interface   Two USB 2.0 backplane I/O connections**   One 10/100/1000Base-T backplane Ethernet port**   Seamless support for PCI Express option cards
2U SERVER-CLASS PCI EXPRESS™ BACKPLANE Chassis Plans' BPX6736 is a server-class backplane with four PCI Express™ option card slots. The butterfly form factor of the BPX6736 is designed for use in a 2U chassis. SHB SLOT Accepts an SHB Express™ (PICMG® 1.3) compliant (server class) processor such as a Chassis Plans NLT/NLI, SLT/SLI or MCX-series system host board. Using an MCX-series SHB will maximize the capabilities of all available PCI Express option card slots. PCI EXPRESS SERIAL SLOTS PCIe1 and PCIe3 option card slots are located on side B of the butterfly backplane. Side B is opposite the SHB and the side B slots are driven by x1 PCI express links from a Chassis Plans MCX-series SHB. PCIe4 and PCIe2 are located on side A of the backplane and are driven with x8 PCI Express electrical links from a server-class SHB. PCIe4 is a x16 and PCIe2 is a x8 mechanical slot. Chassis Plans SHBs support the auto-negotiation and link training features that enables all of the option card slots to support x8, x4 and x1 PCI Espress cards with PCIe4 also capable of supporting x16 PCI Express option cards with a x8 PCIe link. Mechanical interferences may exist between the SHB's cooling solution and certain types of option card heat sinks used on PCI Express option cards installed in backplane slots PCIe2 and PCIe4. To ensure proper mechanical clearances regardless of option card heat sink type, Chassis Plans recommends using either half-length or quarter-length PCI Express option cards in these backplane slots. The MECHANICAL CLEARANCE CHART provides additional information. POWER CONNECTORS The BPX6736 backplane is available with low-profile right-angle power connectors suitable for use with either an ATX or EPS power supply. AUXILIARY POWER CONNECTOR The +12V power connectors on the BPX6736 route auxiliary power to the SHB's edge connectors. The new capability of PICMG 1.3 compliant SHBs and backplanes eliminates the need for auxiliary power connections on the system host board. POWER INDICATORS Surface-mount LEDs provide a convenient visual check for +5V, -5V, +5V AUX, +12V, -12V and +3.3V power connection and status. CAUTION: Never install or remove the SHB or any option card from the BPX6736 backplane if the +5V AUX LED is GREEN. If the system appears to be off and the +5V AUX LED is GREEN, you need to remove or turn-off the incoming power to the system power supply. PRINTED CIRCUIT LAYERS The backplane is a six-layer, .062" thick board with three separate signal layers: +5V/+12V, +3.3V and ground. Multi-layer backplane construction provides excellent noise immunity.	USB AUDIO CONTROLLER The audio controller on the BPX6736 backplane eliminates the need to dedicate an option card slot to a sound card. The USB audio controller supports a variety of speaker, headset and microphone configurations. The high-performance stereo audio ADC/DAC, general purpose I/O connections and codec functionality are key features of the BPX6736's audio controller. The USB4 port from the Chassis Plans MCX-series SHB provides the input for the USB audio controller and the USB4 input becomes Audio0 on the BPX6736 backplane. If a Chassis Plans NLT/NLI or SLT/SLI SHB is used, then the SHBs must be factory-equipped with the optional USB routing to the backplane. Likewise non-Chassis Plans SHBs must provide the optional USB I/O backplane routing defined in the PICMG 1.3 specification in order to enable the audio functionality of the Chassis Plans BPX6736 backplane. OPTIONAL USB 2.0 INTERFACES Chassis Plans' BPX6736 provides one USB 2.0 header capable of supporting two general purpose USB 2.0 backplane interface ports. OPTIONAL ETHERNET INTERFACE Chassis Plans' BPX6736 backplane supports the optional Ethernet routing feature of the SHB Express (PICMG 1.3) specification. One 10/100/1000Base-T Ethernet RJ-45 connector is available for use on the backplane. The SHB OPTIONAL BACKPLANE I/O SUPPORT TABLE explains the backplane I/O capabilities supported by Chassis Plans' PICMG 1.3 System Host Boards. CONNECTING POWER A new approach is required to connect system power due to the combination of new power supply technologies and the soft-power control signals available via the Advanced Configuration and Power Interface (ACPI). ACPI signals are now supported by PICMG 1.3 SHBs and backplanes. Auxiliary power connectors located on the PICMG 1.4 backplanes now deliver all of the power directly to the edge connectors of the SHB. Auxiliary power connectors on the backplane are provided to help improve system Mean Time To Repair (MTTR). All power can be delivered to the SHB via the board's edge connectors. Chassis Plans' PICMG 1.3 SHBs and backplane SHB edge connector slots have ample power pins available to meet the power demands of high-performance dual processor SHBs. The ATX/EPS and +12V power connectors on the BPX6736 backplane also have an ample number of power pins available to meet these demands. The system designer needs to be aware of the potential power demands of the entire system including the particular SHB to ensure that both the power supply and the power connectors in the cable harness can safely deliver the necessary power to drive the entire system. Specific implementations of ACPI signals, ATX/EPS power supply type and the operating system software will determine the specific connection method for the power supply. For example the use of the Power Good (PWRGD), Power Supply On (PSON#), Five Volt Standby (5VSB) and the Power Button (PWRBT#) ACPI or soft power control signals require the following connection method: ACPI signal usage is optional and may be turned off using the SHBs BIOS and/or signal jumpers. Specific power connections and BIOS parameters will differ depending on unique system design requirements. Refer to the Appendix B (Power Connection) and Advanced Setup BIOS sections found in the Technical Reference Manual for your specific Chassis Plans system host board for more information.
MECHANICAL CLEARANCE CHART - OPTION CARD SLOTS
Chassis Plans PCIe4 CARD LENGTH PCIe3 CARD LENGTH PCIe2 CARD LENGTH PCIe1 CARD LENGTH SHB Full ¾ ½ ¼ Full ¾ ½ ¼ Full ¾ ½ ¼ Full ¾ ½ ¼ NLT/NLI NR NR OK OK OK OK OK OK NR NR OK OK n/a n/a n/a n/a SLT/SLI OK OK OK OK OK OK OK OK OK OK OK OK n/a n/a n/a n/a MCX-series NR NR OK OK OK OK OK OK NR NR NR OK OK OK OK OK Note: The letters NR indicates that this card length is Not Recommended for use in the option card slot with the specific Chassis Plans SHB Note:The letters n/a indicates that the card slot is not available when using this system host board
SHB OPTIONAL BACKPLANE I/O SUPPORT TABLE
Chassis Plans ETHERNET USB SHB LAN0 LAN1 LAN2 USB0 USB1 USB2 USB3 USB4 USB5 USB6 USB7 NLT/SLT1 - - n/a - - AUDIO X n/a n/a n/a n/a SLT/SLI1 - - n/a - - AUDIO X n/a n/a n/a n/a MCX-series2 - - X - - - - AUDIO X X X 1Backplane routings of USB interfaces 2 & 3 are factory build options on the NLT/NLI and SLT/SLI and must be ordered to enable backplane audio controller functionality 2LAN2 is a 10/100/1000BASE-T Ethernet interface when using a MCX-series SHB Note: The letter X indicates an interface connection routed to SHB edge connector C for use on the backplane Note: The letters n/a indicates that the function is not available on this system host board
MODEL NAME: BPX6736
MODEL# MODEL NAME DESCRIPTION S6736-007 BPX6736-CRA ATX/EPS (right angle connector)
PCI Express Backplanes Reference Manual (3.2MB) - Click Here